Seed-hawk TOOLBAR 2008 Manuel d'utilisateur Page 60

  • Télécharger
  • Ajouter à mon manuel
  • Imprimer
  • Page
    / 85
  • Table des matières
  • MARQUE LIVRES
  • Noté. / 5. Basé sur avis des utilisateurs
Vue de la page 59
TROUBLE-SHOOTING
SYMPTOM
POSSIBLE CAUSE
SOLUTION
Incomplete engagement of
hydraulic quick couplers
Inspect quick couplers to ensure
complete engagement.
Meter Wheel Switch not set to
“ON”.
Ensure that both the Meter
Wheel Switch and Main Power
Switch are “ON”.
Lock valves for shanks are set in
closed position.
Ensure that both lock valves,
one at the manifold and one at
the tractor quick coupler, are set
to the open position.
No electrical power to shank
solenoid valve.
Check for open wire in harness
to solenoid coil.
No electrical power to shank
pressure adjustment motor.
Check for open wire to shank
pressure adjustment motor.
Shank relief motor seized. Manually rotate motor coupler
using pliers or vice-grip until
motor turns freely.
Tractor hydraulic selector valve
not holding pressure.
Disconnect coupler at Circuit #1.
If pressure is now adjustable,
repair the tractor selector valve.
Solenoid coil malfunctioning. Activate solenoid valve manual
override. If the shank pressure
responds properly, replace the
coil.
Solenoid valve cartridge
contaminated.
Remove solenoid valve cartridge
per repair instructions in the
MAINTENANCE section of this
Operator’s Manual, inspect,
clean and replace.
Shank relief valve cartridge
contaminated.
Remove relief valve cartridge
per repair instructions in the
MAINTENANCE section of this
Operator’s Manual, inspect,
clean and replace.
Shank cylinder seal leaking. Remove and replace shank
cylinder seal per repair
instructions in the
MAINTENANCE section of this
Operator’s Manual.
Shank pressure gauge
malfunctioning.
Remove and replace pressure
gauge.
Can not adjust shank pressure.
Shank orifice blocked. Remove cap and orifice. Clear
contamination from orifice and
replace orifice and cap.
55
Vue de la page 59
1 2 ... 55 56 57 58 59 60 61 62 63 64 65 ... 84 85

Commentaires sur ces manuels

Pas de commentaire