Seed-hawk TOOLBAR 2009 Manuel d'utilisateur télécharger pdf (Page 36)

Seed Hawk Manual Tool Bar Page 33

“Y”

4.8.5 Cornering

Ideally, the most effective seeding, fertilizer

banding and soil packing occurs when the

implement is pulled in a straight line. Some

field conditions will not allow all of the

seeding to occur in a straight line. It is

important to remember that as the packer tire

is following a curved path, it will tend to ride

up on one side of the furrow. Seed and

fertilizer placement, as well as, packing

performance are all compromised.

4.8.6 Furrow Depth and Width

The knives are designed to place fertilizer

0.75 in (19 mm) below and 1.5 in (38 mm) to

the side of the seed.

To adjust the depth of the fertilizer

knife in relation to the seed knife:

1. Loosen hardware, #1 FIG.

13.

2. Raise or lower fertilizer knife

accordingly.

NOTE: Factory setting for

fertilizer knife is “Y”: 20.75

in (527 mm) from the

carbide tip to the corner on

the trip plate as shown in

FIG. 14.

3. Tighten hardware.

FIG. 14

FIG. 13

1 2 ... 31 32 33 34 35 36 37 38 39 40 41 ... 72 73

Pas de commentaire

Seed-hawk TOOLBAR 2009 Manuel d'utilisateur Page 36