Seed-hawk GRANULAR AND LIQUID TANKS 2008 Manuel d'utilisateur télécharger pdf (Page 25)

OPERATION

Metering Roller

The metering roller provided in each compartment is designed to

accommodate every / all product for seeding small oil seeds to large

pulses as well as granular fertilizer.

There are sections that make up the roller which can be replaced if

damage occurs.

There are two colored roller sections on some meters. The red sections

have an 11% less displacement than the black sections. When a

machine’s air distribution system has tower heads with different outlets

your seeding rate can be up to 11% out.

EX: 64’ with 12” spacing tool bar has 64 runs.

Having an 8 outlet meter feeding 64 runs; every tower would have 8

runs per tower. The roller sections are all black for this example.

EX: 65’ with 10” spacing tool bar has 78 runs.

Having an 8 outlet meter feeding 78 runs; the furthest towers will

have to be 9 run heads and the other 6 towers would need 10 run

heads. A 9 run head has an 11% higher seeding rate than a 10 run

head. The red sections are then used to decrease the seeding rate

for the 9 run heads by 11%. Having done this, the seeding rate

across the tool bar will be even.

1 2 ... 20 21 22 23 24 25 26 27 28 29 30 ... 55 56

Pas de commentaire

Seed-hawk GRANULAR AND LIQUID TANKS 2008 Manuel d'utilisateur Page 25